Beli impact glove di monotaro.id

BRAND: MEC DEXMODEL NO: OF-53> Level 4 (maximum) abrasion> Cut Level 3> Gloves for oil & gas extraction/mining/ petroleum> Anti slip gloves for grip & lifting> Synthetic leather glove with reinforced kevlar palm, finger tips and cross stitched with kevlar thread> Extra protection on fingers & knuckle back with vinyl TPR moulds> Open neoprene cuff for easier pulling on & off

Sarung Tangan dari Krisbow merupakan salah satu alat keselamatan kerja yang dapat membantu melindungi tangan Anda dari barang-barang atau permukaan yang mengandung cairan seperti minyak, oli, kotoran, dan cairan kimia yang berbahaya. Sarung tangan ini terbuat dari material karet untuk memberikan grip yang lebih baik saat Anda memegang barang, dan juga memiliki tekstur yang lentur dan nyaman digunakan.

A comfortable, easy access glove for your basic outdoor needs.

Easy to mount and wire, easy to handle. A variety of Contact configurations, and for DC load switching, selectable according to the exposed type and application. High durability: 5 million times mechanical and 500,000 times electrical (at rated load) . Product lineup includes diode built-in type and auxiliary power relay (JEC-174D) * Rated current and coil resistance are measured at a coil temperature of 23°C, tolerance is AC rated current 15%, -20%, DC coil Resistance is ± 15%. * The maximum allowable voltage is the maximum value of the allowable voltage fluctuation range of the relay coil operating power supply, and is the value at an ambient temperature of 23°C. It is not continuous tolerance. * The rated current value of the built-in operation indicator is AC10/12/24/50V, DC6/12/24/48V is about 10mA at light-emitting diode current, AC100/ (110) , 200/ (220) , DC100/110 200/220V increases by about 0.2mA at neon lamp current. * Please note that there is an unstable region that cannot be cut off near the contact current of 0.5 to 2.5A for an inductive load of 125VDC or more for DC loads. * When using an inductive load with L/R exceeding 7 ms for a DC load, use an arc cutoff time of 50 ms or less as a guide for availability. Also, consider the circuit so that the cutoff time is 50ms or less when using. * For AC loads, the switching capacity is very small.

Dibuat dengan kulit lokal terbaik dan di Lapisi bagian dalamnya menggunakan Bahan yg Lembut dan menyerap keringat, sehingga sangatlah nyaman dan aman di gunakan.Sangat baik di gunakan untuk pengerjaan pengelasan / welding dan melindungi tangan dari panas las dan Percikan spater las.Welding Glove Yutaka Nyaman dan safety di gunakan untuk pekerjaan Anda